Mansfield Premium Roofing provides professional chimney flashing in Mansfield, TX for residential and commercial properties across southeast Tarrant and northern Ellis counties. Flashing is one of the four things Mansfield explicitly requires on every reroof, permit or no permit, and it is also the first thing a rushed crew reuses. Those two facts together explain a great many chimney leaks in this city.
A chimney is flashed with two independent layers that work as a pair. Step flashing goes in one piece to each shingle course, worked up the side of the masonry as the roof is laid. Counter-flashing is separate metal let into a cut in the mortar joint, lapping down over the step flashing, so that water running down the brick is thrown clear rather than finding the joint between roof and chimney.
Reusing the old metal defeats the whole arrangement. Step flashing that has been bent up, walked on and pulled out of one roof cannot be woven correctly into another, and counter-flashing that is simply bedded in sealant instead of cut into the mortar will release within a few Texas summers of expansion and contraction. Sealant is a maintenance product and it is being asked to do structural work every day in this metroplex.
The cricket is the item most often missing altogether. A chimney wide enough to dam water above it needs a framed saddle built in behind to divide the flow around both sides, and without one the debris and water simply sit against the brick. If your chimney is on a slope and the shingles behind it are always dark and damp, that is the diagnosis.
Because we are stripping and reflashing rather than patching, this is genuinely cheapest during a reroof and disproportionately expensive as a standalone visit. Where your roof already sits within a few years of replacement and the chimney is weeping, we will usually recommend a temporary correction with a written note of what it is, and doing the job properly when the roof comes off.
Every chimney we reflash gets photographed at the stage the counter-flashing is cut and before the shingles cover the step metal, for the same reason everything else here does. Nobody is coming to look. In ten years the only way anybody will know whether that flashing was new metal cut into the mortar or old metal bedded in caulk is if somebody took a picture.
Our licensed and insured team brings the right materials and equipment to every job — full tear-off carried down to bare roof sheathing, 7/16-inch OSB sheathing swapped sheet for sheet, aluminum drip edge lapped over underlayment at the rakes, step flashing woven course by course up a sidewall, counter-flashing let into a raked chimney mortar joint, synthetic underlayment fastened with capped plastic nails — and backs the work with a written workmanship warranty. We serve Mansfield and nearby communities including Arlington, Grand Prairie, Cedar Hill, DeSoto.
What We Handle
Everything our chimney flashing in Mansfield covers
One crew, one point of contact, and the full range of chimney flashing work in Mansfield, TX. If it is on this list we do it in house rather than handing it to a subcontractor:
- chimney flashing repair Mansfield TX
- chimney leak roof Texas
- step flashing chimney Tarrant County
- counter flashing mortar joint
- chimney cricket saddle roof
- chimney flashing replacement 76063
- chimney leak during rain Mansfield
- reflash chimney reroof
- chimney chase cover
- masonry chimney roof leak
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Mansfield services.
Materials, equipment and how we do chimney flashing
The difference between chimney flashing that lasts and chimney flashing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with full tear-off carried down to bare roof sheathing, 7/16-inch OSB sheathing swapped sheet for sheet, aluminum drip edge lapped over underlayment at the rakes, step flashing woven course by course up a sidewall, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Mansfield job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in southeast Tarrant and northern Ellis counties means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do chimney flashing outside Mansfield
Mansfield Premium Roofing covers Mansfield and the surrounding communities of southeast Tarrant and northern Ellis counties. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Chimney Flashing in Arlington, TX — Tarrant County, population 394,266
- Chimney Flashing in Grand Prairie, TX — Dallas County, population 196,100
- Chimney Flashing in Cedar Hill, TX — Dallas County, population 49,148
- Chimney Flashing in DeSoto, TX — Dallas County, population 56,145
- Chimney Flashing in Duncanville, TX — Dallas County, population 40,706
- Chimney Flashing in Lancaster, TX — Dallas County, population 41,275
Start on the Mansfield Premium Roofing homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Mansfield Chooses Mansfield Premium Roofing
- ✓We settle the permit question before tear-off rather than after, because the decking call that triggers a permit is also the line item that moves the price most.
- ✓Sheathing is a per-sheet unit rate written into the contract, never a lump allowance, so nobody profits from finding more of it than there is.
- ✓Four photo sets leave with you: bare deck, underlayment, flashing and drip edge, ridge. Each one captures something the code requires and the finished roof hides.
- ✓When decking or a rafter has to be replaced we tell you in writing that the job is now permitted, pull it in our own name, and wait for the inspection.
The standards behind chimney flashing
Quality here is not a matter of opinion — it is written down. The chimney flashing work we do in Mansfield follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every chimney flashing project in Mansfield gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free chimney flashing free estimate in Mansfield, or request a quote and we'll get right back to you.